Blog

Rain and Freeze Sensors on Plano Sprinkler Systems in the Winter Season

Posted on January 4, 2013

sprinkler repair planoRegarding your sprinkler system, what do you feel is the worst thing that could happen in the winter season?  A burst pipe, a broken sprinkler head, a frozen line?  Now picture your drive to work on one of those below-freezing mornings.  It hasn’t rained but parts of the roads and sidewalks are wet, and icy!  You realize that the house at the end of the street near the stop sign has left their sprinkler system on overnight.  We at Pearson Sprinkler Company believe that the worst thing that could happen to a Plano sprinkler system in the winter season is to cause an icy, dangerous and life-threatening situation.

The solution?  Ensure that your Plano sprinkler system is equipped with a Rain and Freeze Sensor (R&F Sensor).  An R&F Sensor is a wireless sensor that is mounted to your house and communicates with your sprinkler system’s controller.  When the sensor becomes too wet (raining), it will not allow the sprinkler system to water, saving water and subsequently, saving you money.  When the sensor becomes too cold (freezing temperatures), it will not allow the sprinkler system to water, saving possible injuries and eliminating dangerous situations on roads and sidewalks.

Numerous cities have requirements regarding R&F Sensor listed on their websites and also have the requirements outlined in their respective City Ordinance documents.  Most cities in the Pearson Sprinkler Company service area require that an R&F Sensor is installed on all new sprinkler system installations.  In addition, several cities require that an R&F Sensor is installed when a sprinkler system controller is replaced on an existing system, if the system was not already equipped with a sensor.  Some cities even offer a rebate program when a qualified R&F Sensor is installed on an existing system that does not already have a sensor installed.  Please check with your respective City to determine their specific requirements and possible rebates.

More specifically, the City of Plano recently posted the following on the City’s website homepage regarding Plano sprinkler systems:

“Effective immediately, the City of Plano will allow irrigation between the hours of 10am and 6pm through March 1st [2013] to reduce icing of streets and sidewalks during winter months.  All other Stage 2 watering restrictions remain in place including restriction to two days per week.  Water restrictions are expected to continue through 2013 due to low lake levels.  Everyone is encouraged to operate irrigation systems manually in order to provide efficient and cost-effective watering.”

If your Plano sprinkler system is already equipped with an R&F Sensor, check to make sure that it is still working.  It is easy for your sensor to become clogged with cobwebs and debris, which you should remove.  To check to see if your sensor is functioning, spray it with water and then look at the sprinkler system controller.  If the controller indicates that it will not water (usually a red light), then the sensor is functioning.

mexes.com.ua/
emozzi.com.ua
barkar.com.ua/

Winter Watering Restrictions in the Pearson Sprinkler Company Service Area

Posted on December 12, 2012

Winter Watering RestrictionsDespite the arrival of winter, the decrease in daily temperature from the scorching 100ºF days of summer, and slight increase of precipitation, watering restrictions remain for most of the Pearson Sprinkler Company service area.  Plano, North Dallas, Richardson, Allen, Murphy, Parker, Frisco, and McKinney are currently enforcing a “Stage 2” watering restriction.  Most of these cities and towns obtain some, if not all, of the public’s water from the North Texas Municipal Water District (NTMWD).

According to the NTMWD, the NTMWD issued a Stage 2 water restriction in late August 2012, to be in effect until further notice.  Typically for the cities in the Pearson Sprinkler Company service area, Stage 2 watering restrictions include, but are not necessarily limited to, watering with an automatic sprinkler system no more than two times per week, no watering between the hours of 10am and 6pm, and soaker hose and/or drip irrigation use permitted up to two hours on any day for foundation and trees.  Please consult your city’s water department for specific restrictions and watering guidelines for your community.

“The rainfall we have received this year along with water projections and meeting our water use reduction goals has put NTMWD in a position to remain in Stage 2,” said Jim Parks, Executive Director of NTMWD, as opposed to remaining in Stage 3 water restrictions.  “While our primary reservoirs are in good shape, we are still unable to use Lake Texoma, 28% of the total NTMWD water supply, due to the infestation of an invasive species, the zebra mussel,” Parks added.

Unfortunately, the Pearson Sprinkler Company service area will not have the possibility of being free of watering restrictions until the water supply from Lake Texoma is restored.  The NTMWD does not expect to resume pumping water from Lake Texoma until a pipeline extension from the Texoma water treatment plant in Wylie is completed in the fall of 2013.

mexes.com.ua/
emozzi.com.ua
kokun.net/
купить кондиционер в киеве www.bestcool.com.ua

Sprinkler System Repair

Posted on February 3, 2012

With water rates increasing and more restrictions on lawn sprinkler systems, Pearson Sprinkler Company has received significant feedback concerning sprinkler system repair.  Many people have had questions concerning the new rules and regulations that have been implemented for the installation and maintenance of lawn sprinkler systems.  The Texas Commission on Environmental Quality (TCEQ) regulates irrigation in the State of Texas.  As of January 1, 2010, the State of Texas Legislature passed a new law that makes it a misdemeanor crime for any person not holding a valid Irrigator or Irrigation Technician license to install, design, repair, maintain, or even inspect a lawn sprinkler system.  This includes a lawn crew.  The reason that we bring this up is because we have had several calls to repair work that an unlicensed lawn crew or handyman has started, but could not finish, because a city inspector has stopped them and forced them to cease work because they were unlicensed.  If your lawn company or handyman has an Irrigator License, the license number will be posted on their service vehicle by the front fender in minimum two-inch tall lettering.  There are lawn care companies that do hold licenses but the majority of the lawn care companies and handymen do not.  If you are not sure, ask your service person to show you their license.  The TCEQ requires that any licensed irrigator or irrigation technician carry their license on them that has their name and license number on it.  It will also have the State of Texas seal on it as well as the TCEQ header.  These new laws benefit the homeowner or consumer because if you hire a licensed irrigator, they have accountability through the State of Texas.  If you have a problem and the company will not return to make a warranty repair, you have their name and license number, and in turn the ability to file a complaint with the State of Texas.  In addition, a licensed irrigator is required to stay up-to-date on the latest technology and products related to irrigation.  Just like any professional license, irrigators are required to take continuing education classes in order to maintain their license.

These changes and new regulations have been implemented because lawn sprinkler systems need to be designed and maintained in a manner that promotes water conservation.  Since our area has grown substantially over the years and we have not added any new lakes to support our growth, we will continue to stress our water resources resulting in lawn sprinkler restrictions.  It is important that consumers as well as companies respect these new laws; otherwise, there will be major changes in the way we are allowed to have irrigated landscaping.  If we do our part, we may be able to offset the population growth and increased demand for water by conserving water and using our lawn sprinkler systems efficiently and with a little common sense.

If you have any questions related to sprinkler system repair or how you can do your part in conserving water with your lawn sprinkler system, feel free to contact Pearson Sprinkler Company and we will be happy to answer any questions for you.

mexes.com.ua
emozzi.com.ua
купить в киеве кондиционер www.bestcool.com.ua

Plano Sprinkler Repair

Posted on January 30, 2012

Pearson Sprinkler Company has been specializing in Plano sprinkler repair for over five years.  With the severe drought and watering limited to only twice per month, it is more important than ever to make sure that your lawn sprinkler system is operating efficiently so you can maximize your watering cycle.  There are several things to look for when you check your lawn sprinkler system.  The most important thing to look for is broken spray heads or geysers.  These are very easy to notice and usually a simple repair.  With the majority of homes in Plano being more than 20 years old, the original spray heads will start to fail.  If you have an aging lawn sprinkler system and you have one head blow apart, it is good practice to replace all of the original sprinkler heads at the same time.  When sprinkler heads are over 20 years old, they turn into little “ticking time bombs” and need to be checked very often for geysers.  When you have a broken sprinkler head, it not only wastes water, but it causes a low pressure situation resulting in the rest of the sprinkler heads on the particular station to get inadequate coverage.

It is also important to observe the sprinkler head on each station to verify that they are spraying in the correct direction.  It is very common for a loose spray nozzle to turn and start spraying into the street or neighbor’s lawn.  One misguided nozzle can cause a large area of the lawn or foundation to stay dry.  If you notice a misguided sprinkler head, try to simply tighten the nozzle.  This usually restores the spray nozzle to its original position.  If this does not work, you can try turning the stem of the sprinkler head until it is spraying in the proper direction.

Another common occurrence is for snails to migrate into the top of 360º spray nozzles.  When this happens, it blocks a large portion of the spray nozzle, resulting in a loss of coverage.  If you see this, the best way to solve the problem is to poke the snail shell with a piece of a coat hanger or marking flag in order to break up the shell so that it blows out the top of the nozzle.  This will allow the spray nozzle to achieve proper coverage again.  With Pearson Sprinkler Company’s experience in Plano sprinkler repair, these are the three most common problems that are easy for the homeowner to check and either correct or have corrected.

Lastly, check your sprinkler controller to make sure that you are not over watering.  It is very easy to forget about your sprinkler system and how often it is operating.  You need to make sure that it is not set to water on different programs.  This will cause your sprinkler system to water more often than you may have set it for.  Pearson Sprinkler Company offers a watering guide that will guide you in the proper watering schedule for our area.

Please contact Pearson Sprinkler Company and we will be happy to answer any questions you may have.

mexes.com.ua/
emozzi.com.ua
kokun.net
кондиционеры киев купить bestcool.com.ua

High Pressure Sprinkler Systems

Posted on

Pearson Sprinkler Company has found numerous sprinkler systems Plano that have excessive pressure, especially in west Plano.  Pearson Sprinkler Company cannot emphasize enough how important it is to check the pressure on your sprinkler system.  A homeowner can do this simply by attaching a pressure gauge that can be purchased at your local hardware store, to your house’s water system.  Attach the gauge to a hose bib at your house and turn the water on.  If the pressure exceeds 80 pounds per square inch (psi) on the gauge, you will need to regulate the pressure to your sprinkler system.  If the pressure is below 80 psi at the hose bib; however, you notice excessive misting or fogging at the spray heads, determine if your house has a pressure regulator.  A pressure regulator on a house typically corrects the high pressure water entering the house, but not the high pressure water entering the sprinkler system.  In this case, you would need to attach the pressure gauge to a component of the sprinkler system.  Pressure regulation will save wear and tear on the various components of the sprinkler system as well as minimize misting from the spray heads.  If the actual spray head pressure is higher than the manufacturer’s operating range for that particular spray head, then some form of pressure regulation would be required.

Another easy way to tell if pressure regulation is required is to observe the system in operation and see if there is excessive misting or fogging at the spray heads.  If the sprinkler system is operating at optimum pressure, then the water being emitted from the spray head will be in a droplet form, resembling rain.  The droplets will have enough weight to fall to the ground, to penetrate the soil and to reach the outer edges of the spray head’s radius before being evaporated by the sun and/or light wind.  By regulating the pressure of the sprinkler system, you will also be saving a substantial amount of water.  With the rates of water rising, the cost of pressure regulation will be quickly off-set.  In west Plano and Frisco, Pearson Sprinkler Company has encountered numerous areas where pressure levels can range from approximately 110 psi up to 125 psi.  The average manufacture’s optimum pressure at the base of the spray head is 35 psi and the maximum recommended pressure is 50 psi.  In many areas in west Plano and Frisco, the pressure is almost four times greater than the manufacture’s recommendation.  For every 5 psi above the manufacturer’s recommended pressure, there is an 8% increase in water use.  The result, a higher water bill and an inefficient sprinkler system that requires frequent repairs.

With water restrictions in effect for sprinkler systems Plano, and no sign of them easing in the near future, it is vital to check your system thoroughly to maximize each watering cycle.  The majority of newer controller models have a test function that you can utilize to check the sprinkler system.  Most are preset to run for two minutes per station.  You can simply walk through your property as each station runs and look for geysers or low pressure areas.  If you have a station that has very low pressure and the spray heads are not popping up completely, this could indicate that you have a leak.  The leak is robbing the pressure to adequately run the station properly.  You would be surprised by how often a spray head or shrub riser gets broken.